{"product_id":"audi-b8-5-s5-headlight-intake-headlight-delete-diy-3d-print-stl-file-pack-copy","title":"2013–2017 Audi B8.5 S5 Headlight Intake \/ Headlight Delete – DIY 3D-Printable STL File Pack","description":"\u003cp\u003eThe 4RS B8.5 S5 Headlight Intake \/ Headlight Delete DIY STL File Pack is a digital 3D-printing package for builders who want to print, finish, and install their own headlight intake setup.\u003c\/p\u003e\n\u003cp\u003eThis is not a generic STL. The design was developed specifically around the Audi B8.5 S5 headlight geometry and features our clean, non-lighted configuration.\u003c\/p\u003e\n\u003cp\u003eOur completed, professionally printed and finished version starts at $400. This DIY file pack is intended for experienced users who already have the appropriate printer, materials, time, and ability to print, prepare, finish, and install the part themselves.\u003c\/p\u003e\n\u003ch2\u003eWHAT’S INCLUDED\u003c\/h2\u003e\n\u003cp\u003eAudi B8.5 S5 headlight intake main duct STL\u003c\/p\u003e\n\u003cp\u003eClean, non-lighted headlight-delete design\u003c\/p\u003e\n\u003cp\u003eStart Here README\u003c\/p\u003e\n\u003cp\u003eRecommended printing notes\u003c\/p\u003e\n\u003cp\u003ePersonal-use license\u003c\/p\u003e\n\u003cp\u003eAccess to future revisions of this file pack when released\u003c\/p\u003e\n\u003ch2\u003eRECOMMENDED MATERIALS\u003c\/h2\u003e\n\u003cp\u003eFor installed automotive use, we recommend heat-resistant, engineering-grade materials such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003ePAHT-CF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePA-CF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eNylon-CF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eASA-CF\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eASA\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePETG-CF for mockups or properly finished applications\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePLA is not recommended for installed automotive or engine-bay use.\u003c\/p\u003e\n\u003ch2\u003ePRINTING NOTES\u003c\/h2\u003e\n\u003cp\u003eThis is an advanced DIY file pack. Final fitment and finish quality will depend on your printer, filament, slicer settings, calibration, shrinkage compensation, support setup, post-processing, and installation.\u003c\/p\u003e\n\u003cp\u003eLarge-format 3D-printing experience is strongly recommended.\u003c\/p\u003e\n\u003cp\u003eSanding, trimming, drilling, filling, priming, painting, clear coating, or minor fitment adjustments may be required.\u003c\/p\u003e\n\u003cp\u003eWhen printing with PAHT-CF or PA-CF, shrinkage compensation may need to be adjusted in your slicer. A common starting point is approximately 100.5%–100.7%, but the correct setting will vary depending on your printer, filament, and printing environment.\u003c\/p\u003e\n\u003ch2\u003eIMPORTANT DIGITAL-PRODUCT NOTICE\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis is a digital download only. No physical product will be shipped.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDue to the nature of digital products, all sales are final once download access has been delivered, except where otherwise required by law.\u003c\/p\u003e\n\u003cp\u003eThese files are licensed for personal use only. You may not:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cp\u003eResell, redistribute, share, or upload the digital files\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eSell modified versions of the files\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003ePrint or reproduce the design for commercial sale\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eManufacture parts for others in exchange for payment\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp\u003eUse the files or printed parts commercially without written permission from Four Rings Society\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFour Rings Society is not responsible for failed prints, poor print quality, incorrect slicer settings, unsuitable materials, printer-calibration issues, improper installation, wiring mistakes, heat damage, or vehicle damage resulting from improper use.\u003c\/p\u003e\n\u003cp\u003eProfessional installation is recommended. Use and install at your own risk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCurrent File Version: V2\u003c\/strong\u003e\u003c\/p\u003e","brand":"Four Rings Society","offers":[{"title":"NONE","offer_id":53940813267220,"sku":null,"price":180.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0906\/4939\/5476\/files\/IMG-6076.png?v=1788411722","url":"https:\/\/fourringssociety.com\/products\/audi-b8-5-s5-headlight-intake-headlight-delete-diy-3d-print-stl-file-pack-copy","provider":"Four Rings Society ","version":"1.0","type":"link"}